BillieBars Ford Ranger (2019+) Low Profile Bed Rack with 5" High Brackets
Equip your 2019-current Ford Ranger with the original American-made, tonneau cover-compatible BillieBars Low Profile Bed Rack. Featuring durable anodized aluminum crossbars, 5-inch powder-coated steel brackets, and stainless steel security hardware, this modular rack provides a strong, low-profile foundation for rooftop tents, bikes, kayaks, cargo baskets, MOLLE panels, recovery equipment, and other adventure gear.
The BillieBars Low Profile Bed Rack is designed to add versatile cargo capacity without sacrificing convenient access to your truck bed. Its compact 5-inch bracket height keeps equipment close to the bed for a streamlined profile while providing approximately 3.5 inches of clearance beneath the crossbars.
Compatible with most roll-up, retractable, and tri-fold tonneau covers, the rack allows you to secure cargo above the bed while keeping equipment below protected. When full bed access is required, the aluminum crossbars can be removed in seconds while the mounting brackets remain installed.
Manufactured in the USA, BillieBars combines rust-resistant aluminum, durable powder-coated steel, and stainless steel security hardware to create a dependable rack system for overlanding, camping, hauling, and everyday truck use.
5" High Brackets • Tonneau Cover Compatible • Removable Crossbars • No-Drill Installation • Made in the USA
Key Features
- Vehicle-Specific Ford Ranger Fitment: Designed for 2019-current Ford Ranger truck beds.
- 5" High Brackets: Low-profile bracket configuration keeps cargo close to the truck bed and provides approximately 3.5 inches of underside clearance.
- Tonneau Cover Compatible: Works with most roll-up, retractable, and tri-fold tonneau covers.
- Versatile Cargo Platform: Supports rooftop tents, bicycles, kayaks, cargo baskets, storage boxes, MOLLE panels, and recovery equipment.
- Anodized Aluminum Crossbars: Lightweight, strong, and naturally resistant to corrosion and rust.
- Powder-Coated Steel Brackets: Dual-stage coating provides durable protection against weather and trail exposure.
- Stainless Steel Security Hardware: Corrosion-resistant hardware helps secure the rack and mounted equipment.
- Quick-Removal Crossbars: Crossbars can be removed in seconds while the brackets remain attached to the bed.
- No-Drill Installation: Mounts to the Ranger bed rails using the included vehicle-specific hardware.
- Single-Person Installation: Straightforward design allows the rack to be installed without specialized equipment.
- Made in the USA: American-made and protected by BillieBars patented rack-system designs.
Why It Performs
- Maintains a Low Center of Gravity: The 5-inch bracket height positions gear lower than many traditional bed racks for a more streamlined setup.
- Preserves Bed Security: Compatibility with many tonneau covers allows equipment below the rack to remain covered and protected.
- Adapts to Changing Cargo: Modular crossbars accommodate a wide range of outdoor, work, and overland accessories.
- Provides Fast Bed Access: Easily removable crossbars restore unobstructed access to the truck bed when needed.
- Resists Corrosion: Anodized aluminum and stainless steel hardware deliver dependable performance through rain, snow, mud, and road salt.
- Built for Demanding Loads: Strong crossbars and steel brackets create a stable mounting foundation for serious truck-bed equipment.
Technical Specifications
- Brand: BillieBars
- Product: Low Profile Truck Bed Rack
- Vehicle Fitment: Ford Ranger (2019-Current)
- Bracket Height: 5 in.
- Underside Clearance: Approximately 3.5 in.
- Crossbar Quantity: 2
- Crossbar Dimensions: 3.15 in. Ă— 1.57 in.
- Crossbar Material: Anodized Aluminum
- Bracket Quantity: 4
- Bracket Material: Dual-Stage Powder-Coated Steel
- Hardware Material: Stainless Steel
- Installation Type: No-Drill Bed-Rail Mounting
- Recommended Hardware Torque: 20–25 ft-lbs
- Tonneau Cover Compatibility: Most Roll-Up, Retractable, and Tri-Fold Covers
- Crossbar Removal: Quick-Release Design
- Country of Manufacture: USA
- Patent Numbers: 11,891,124; 12,291,171; 12,221,073
What's Included
- (2) BillieBars Anodized Aluminum Crossbars
- (4) BillieBars 5" High Powder-Coated Steel Brackets
- Stainless Steel Security Hardware
- Security Installation Tool
- Vehicle-Specific Mounting Hardware
- Installation Instructions
Important Fitment Note: This rack is designed for 2019-current Ford Ranger models and includes the 5-inch bracket configuration. Ford Ranger Raptor models from 2024 onward require BillieBars Bed Cap Spacer Shims to properly support the rack-system load. Spacer shims and tonneau covers are sold separately.
Ideal For
- Ford Ranger Overland Builds
- Rooftop Tent Mounting
- Bicycles and Kayaks
- Cargo Baskets and Storage Boxes
- MOLLE Panels
- Recovery Equipment
- Camping and Adventure Gear
- Work and Utility Equipment
- Tonneau Cover Truck-Bed Setups
Why Choose the BillieBars Low Profile Bed Rack?
- Vehicle-specific design provides a clean and secure fit on the Ford Ranger.
- Low-profile 5-inch brackets create a streamlined cargo platform with approximately 3.5 inches of clearance.
- Compatible with most popular roll-up, retractable, and tri-fold tonneau covers.
- Removable crossbars provide full bed access without removing the mounting brackets.
- Anodized aluminum, powder-coated steel, and stainless steel hardware resist corrosion.
- No-drill installation simplifies setup and avoids permanent truck-bed modifications.
- American-made construction provides dependable quality for work, travel, and overlanding.
Why Buy from Expedition Superstore?
- Authorized BillieBars Dealer: Shop genuine BillieBars bed racks and accessories backed by knowledgeable truck and overland specialists.
- Expert Fitment Support: Get help confirming Ranger compatibility, tonneau cover clearance, and required Raptor spacer components.
- Complete Truck-Bed Solutions: Find rooftop tents, MOLLE panels, cargo systems, recovery gear, and mounting accessories for your build.
- Need help configuring your Ford Ranger setup? — Schedule your build chat today!
BillieBars Ford Ranger (2019+) Low Profile Bed Rack with 5" High Brackets
Equip your 2019-current Ford Ranger with the original American-made, tonneau cover-compatible BillieBars Low Profile Bed Rack. Featuring durable anodized aluminum crossbars, 5-inch powder-coated steel brackets, and stainless steel security hardware, this modular rack provides a strong, low-profile foundation for rooftop tents, bikes, kayaks, cargo baskets, MOLLE panels, recovery equipment, and other adventure gear.
The BillieBars Low Profile Bed Rack is designed to add versatile cargo capacity without sacrificing convenient access to your truck bed. Its compact 5-inch bracket height keeps equipment close to the bed for a streamlined profile while providing approximately 3.5 inches of clearance beneath the crossbars.
Compatible with most roll-up, retractable, and tri-fold tonneau covers, the rack allows you to secure cargo above the bed while keeping equipment below protected. When full bed access is required, the aluminum crossbars can be removed in seconds while the mounting brackets remain installed.
Manufactured in the USA, BillieBars combines rust-resistant aluminum, durable powder-coated steel, and stainless steel security hardware to create a dependable rack system for overlanding, camping, hauling, and everyday truck use.
5" High Brackets • Tonneau Cover Compatible • Removable Crossbars • No-Drill Installation • Made in the USA
Key Features
- Vehicle-Specific Ford Ranger Fitment: Designed for 2019-current Ford Ranger truck beds.
- 5" High Brackets: Low-profile bracket configuration keeps cargo close to the truck bed and provides approximately 3.5 inches of underside clearance.
- Tonneau Cover Compatible: Works with most roll-up, retractable, and tri-fold tonneau covers.
- Versatile Cargo Platform: Supports rooftop tents, bicycles, kayaks, cargo baskets, storage boxes, MOLLE panels, and recovery equipment.
- Anodized Aluminum Crossbars: Lightweight, strong, and naturally resistant to corrosion and rust.
- Powder-Coated Steel Brackets: Dual-stage coating provides durable protection against weather and trail exposure.
- Stainless Steel Security Hardware: Corrosion-resistant hardware helps secure the rack and mounted equipment.
- Quick-Removal Crossbars: Crossbars can be removed in seconds while the brackets remain attached to the bed.
- No-Drill Installation: Mounts to the Ranger bed rails using the included vehicle-specific hardware.
- Single-Person Installation: Straightforward design allows the rack to be installed without specialized equipment.
- Made in the USA: American-made and protected by BillieBars patented rack-system designs.
Why It Performs
- Maintains a Low Center of Gravity: The 5-inch bracket height positions gear lower than many traditional bed racks for a more streamlined setup.
- Preserves Bed Security: Compatibility with many tonneau covers allows equipment below the rack to remain covered and protected.
- Adapts to Changing Cargo: Modular crossbars accommodate a wide range of outdoor, work, and overland accessories.
- Provides Fast Bed Access: Easily removable crossbars restore unobstructed access to the truck bed when needed.
- Resists Corrosion: Anodized aluminum and stainless steel hardware deliver dependable performance through rain, snow, mud, and road salt.
- Built for Demanding Loads: Strong crossbars and steel brackets create a stable mounting foundation for serious truck-bed equipment.
Technical Specifications
- Brand: BillieBars
- Product: Low Profile Truck Bed Rack
- Vehicle Fitment: Ford Ranger (2019-Current)
- Bracket Height: 5 in.
- Underside Clearance: Approximately 3.5 in.
- Crossbar Quantity: 2
- Crossbar Dimensions: 3.15 in. Ă— 1.57 in.
- Crossbar Material: Anodized Aluminum
- Bracket Quantity: 4
- Bracket Material: Dual-Stage Powder-Coated Steel
- Hardware Material: Stainless Steel
- Installation Type: No-Drill Bed-Rail Mounting
- Recommended Hardware Torque: 20–25 ft-lbs
- Tonneau Cover Compatibility: Most Roll-Up, Retractable, and Tri-Fold Covers
- Crossbar Removal: Quick-Release Design
- Country of Manufacture: USA
- Patent Numbers: 11,891,124; 12,291,171; 12,221,073
What's Included
- (2) BillieBars Anodized Aluminum Crossbars
- (4) BillieBars 5" High Powder-Coated Steel Brackets
- Stainless Steel Security Hardware
- Security Installation Tool
- Vehicle-Specific Mounting Hardware
- Installation Instructions
Important Fitment Note: This rack is designed for 2019-current Ford Ranger models and includes the 5-inch bracket configuration. Ford Ranger Raptor models from 2024 onward require BillieBars Bed Cap Spacer Shims to properly support the rack-system load. Spacer shims and tonneau covers are sold separately.
Ideal For
- Ford Ranger Overland Builds
- Rooftop Tent Mounting
- Bicycles and Kayaks
- Cargo Baskets and Storage Boxes
- MOLLE Panels
- Recovery Equipment
- Camping and Adventure Gear
- Work and Utility Equipment
- Tonneau Cover Truck-Bed Setups
Why Choose the BillieBars Low Profile Bed Rack?
- Vehicle-specific design provides a clean and secure fit on the Ford Ranger.
- Low-profile 5-inch brackets create a streamlined cargo platform with approximately 3.5 inches of clearance.
- Compatible with most popular roll-up, retractable, and tri-fold tonneau covers.
- Removable crossbars provide full bed access without removing the mounting brackets.
- Anodized aluminum, powder-coated steel, and stainless steel hardware resist corrosion.
- No-drill installation simplifies setup and avoids permanent truck-bed modifications.
- American-made construction provides dependable quality for work, travel, and overlanding.
Why Buy from Expedition Superstore?
- Authorized BillieBars Dealer: Shop genuine BillieBars bed racks and accessories backed by knowledgeable truck and overland specialists.
- Expert Fitment Support: Get help confirming Ranger compatibility, tonneau cover clearance, and required Raptor spacer components.
- Complete Truck-Bed Solutions: Find rooftop tents, MOLLE panels, cargo systems, recovery gear, and mounting accessories for your build.
- Need help configuring your Ford Ranger setup? — Schedule your build chat today!
