SPC Adjustable Camber/Caster Upper Control Arms (Pair) - 25490
Restore factory alignment, improve suspension travel, and maximize oversized tire clearance with the SPC 25490 Adjustable Upper Control Arms. Designed specifically for lifted Toyota Tundra and Sequoia models, these forged steel control arms feature maintenance-free ball joints, xAxis™ sealed flex joints, and patented camber and caster adjustment for exceptional on-road handling and off-road performance.
Designed, engineered, tested, and assembled in Colorado, the SPC 25490 Upper Control Arms are engineered to correct the alignment changes caused by suspension lifts. SPC's patented adjustable ball joint system allows precise adjustment of both caster and camber, restoring factory alignment specifications while improving steering feel, straight-line stability, tire wear, and overall handling.
Each control arm is manufactured from high-strength forged steel and equipped with maintenance-free sealed ball joints and free-pivoting xAxis™ sealed flex joints housed in bonded rubber sleeves. This advanced design delivers excellent suspension articulation while maintaining factory ride quality and eliminating routine maintenance. Improved spring bucket clearance and an upgraded ball joint providing 80 degrees of articulation allow significantly greater suspension droop than many competing aftermarket upper control arms.
With 1 degree of caster built directly into the arm and up to +4 degrees of caster adjustment available, the SPC 25490 helps properly position oversized tires farther forward in the wheel well to reduce rubbing and minimize the need for trimming after installing larger tires and lift kits.
Forged Steel Construction • Adjustable Camber & Caster • Maintenance-Free Ball Joints • xAxis™ Flex Joints • 80° Articulation
Key Features
- Patented Camber & Caster Adjustment: Restores proper alignment after installing suspension lifts.
- Forged Steel Construction: Heavy-duty design built for demanding off-road environments.
- Maintenance-Free Ball Joints: Fully sealed design eliminates routine servicing.
- xAxis™ Sealed Flex Joints: Improve articulation while maintaining factory-like ride quality.
- 80° Ball Joint Articulation: Maximizes suspension travel without binding.
- Improved Spring Bucket Clearance: Provides increased droop travel over many aftermarket control arms.
- +1° Built-In Caster: Improves steering stability and oversized tire positioning.
- Sold as a Pair: Complete front upper control arm replacement for one vehicle.
Why It Performs
- Corrects Suspension Geometry: Restores proper caster and camber after lifting your vehicle.
- Improves Handling: Better steering response, tracking, and highway stability.
- Maximizes Suspension Travel: Increased articulation and spring bucket clearance improve off-road capability.
- Optimizes Tire Clearance: Helps move oversized tires forward in the wheel well to reduce rubbing.
- Built for Harsh Conditions: Forged steel construction and premium joints deliver dependable long-term durability.
Vehicle Fitment
- Toyota Sequoia (2008–2022)
- Toyota Tundra (2007–2021)
Technical Specifications
- Brand: SPC (Specialty Products Company)
- Part Number: 25490
- Product: Adjustable Upper Control Arms (Pair)
- Material: Forged Steel
- Ball Joints: Sealed, Maintenance-Free
- Bushings: xAxis™ Sealed Flex Joints
- Maximum Ball Joint Articulation: 80 Degrees
- Built-In Caster: +1 Degree
- Caster Adjustment Range: 0° to +4°
- Camber Adjustment Range: ±2°
- Position: Front
- Quantity: Pair
- Designed, Engineered, Tested & Assembled In: Colorado, USA
What's Included
- (2) SPC Adjustable Upper Control Arms
- Maintenance-Free Adjustable Ball Joints
- xAxis™ Sealed Flex Joint Bushings
Ideal For
- Lifted Toyota Tundra Builds
- Lifted Toyota Sequoia Builds
- Overlanding
- Off-Road Suspension Upgrades
- Rock Crawling
- Daily Drivers
- Oversized Tire Installations
- Alignment Correction
Why Choose the SPC 25490 Upper Control Arms?
- Industry-leading adjustable upper control arms trusted by off-road enthusiasts and racers.
- Patented camber and caster adjustment restores factory suspension geometry after lifting.
- Forged steel construction delivers outstanding durability in demanding environments.
- Maintenance-free ball joints and xAxis™ flex joints maximize articulation while preserving ride quality.
- Designed to improve handling, suspension travel, and oversized tire clearance on lifted Toyota trucks and SUVs.
Why Buy from Expedition Superstore?
- Suspension Experts: Premium suspension components selected for demanding off-road performance.
- Trusted Brands: Genuine SPC products backed by knowledgeable customer support.
- Fast Shipping: Get your suspension trail-ready with premium components delivered quickly.
- Need help building your suspension setup? — Schedule your build chat today!
SPC Adjustable Camber/Caster Upper Control Arms (Pair) - 25490
Restore factory alignment, improve suspension travel, and maximize oversized tire clearance with the SPC 25490 Adjustable Upper Control Arms. Designed specifically for lifted Toyota Tundra and Sequoia models, these forged steel control arms feature maintenance-free ball joints, xAxis™ sealed flex joints, and patented camber and caster adjustment for exceptional on-road handling and off-road performance.
Designed, engineered, tested, and assembled in Colorado, the SPC 25490 Upper Control Arms are engineered to correct the alignment changes caused by suspension lifts. SPC's patented adjustable ball joint system allows precise adjustment of both caster and camber, restoring factory alignment specifications while improving steering feel, straight-line stability, tire wear, and overall handling.
Each control arm is manufactured from high-strength forged steel and equipped with maintenance-free sealed ball joints and free-pivoting xAxis™ sealed flex joints housed in bonded rubber sleeves. This advanced design delivers excellent suspension articulation while maintaining factory ride quality and eliminating routine maintenance. Improved spring bucket clearance and an upgraded ball joint providing 80 degrees of articulation allow significantly greater suspension droop than many competing aftermarket upper control arms.
With 1 degree of caster built directly into the arm and up to +4 degrees of caster adjustment available, the SPC 25490 helps properly position oversized tires farther forward in the wheel well to reduce rubbing and minimize the need for trimming after installing larger tires and lift kits.
Forged Steel Construction • Adjustable Camber & Caster • Maintenance-Free Ball Joints • xAxis™ Flex Joints • 80° Articulation
Key Features
- Patented Camber & Caster Adjustment: Restores proper alignment after installing suspension lifts.
- Forged Steel Construction: Heavy-duty design built for demanding off-road environments.
- Maintenance-Free Ball Joints: Fully sealed design eliminates routine servicing.
- xAxis™ Sealed Flex Joints: Improve articulation while maintaining factory-like ride quality.
- 80° Ball Joint Articulation: Maximizes suspension travel without binding.
- Improved Spring Bucket Clearance: Provides increased droop travel over many aftermarket control arms.
- +1° Built-In Caster: Improves steering stability and oversized tire positioning.
- Sold as a Pair: Complete front upper control arm replacement for one vehicle.
Why It Performs
- Corrects Suspension Geometry: Restores proper caster and camber after lifting your vehicle.
- Improves Handling: Better steering response, tracking, and highway stability.
- Maximizes Suspension Travel: Increased articulation and spring bucket clearance improve off-road capability.
- Optimizes Tire Clearance: Helps move oversized tires forward in the wheel well to reduce rubbing.
- Built for Harsh Conditions: Forged steel construction and premium joints deliver dependable long-term durability.
Vehicle Fitment
- Toyota Sequoia (2008–2022)
- Toyota Tundra (2007–2021)
Technical Specifications
- Brand: SPC (Specialty Products Company)
- Part Number: 25490
- Product: Adjustable Upper Control Arms (Pair)
- Material: Forged Steel
- Ball Joints: Sealed, Maintenance-Free
- Bushings: xAxis™ Sealed Flex Joints
- Maximum Ball Joint Articulation: 80 Degrees
- Built-In Caster: +1 Degree
- Caster Adjustment Range: 0° to +4°
- Camber Adjustment Range: ±2°
- Position: Front
- Quantity: Pair
- Designed, Engineered, Tested & Assembled In: Colorado, USA
What's Included
- (2) SPC Adjustable Upper Control Arms
- Maintenance-Free Adjustable Ball Joints
- xAxis™ Sealed Flex Joint Bushings
Ideal For
- Lifted Toyota Tundra Builds
- Lifted Toyota Sequoia Builds
- Overlanding
- Off-Road Suspension Upgrades
- Rock Crawling
- Daily Drivers
- Oversized Tire Installations
- Alignment Correction
Why Choose the SPC 25490 Upper Control Arms?
- Industry-leading adjustable upper control arms trusted by off-road enthusiasts and racers.
- Patented camber and caster adjustment restores factory suspension geometry after lifting.
- Forged steel construction delivers outstanding durability in demanding environments.
- Maintenance-free ball joints and xAxis™ flex joints maximize articulation while preserving ride quality.
- Designed to improve handling, suspension travel, and oversized tire clearance on lifted Toyota trucks and SUVs.
Why Buy from Expedition Superstore?
- Suspension Experts: Premium suspension components selected for demanding off-road performance.
- Trusted Brands: Genuine SPC products backed by knowledgeable customer support.
- Fast Shipping: Get your suspension trail-ready with premium components delivered quickly.
- Need help building your suspension setup? — Schedule your build chat today!
