SPC Adjustable Camber/Caster Upper Control Arms (Pair) - 25470
Restore factory alignment, improve suspension travel, and maximize oversized tire clearance with the SPC 25470 Adjustable Upper Control Arms. Designed specifically for the 2005–2023 Toyota Tacoma, these forged steel control arms feature maintenance-free ball joints, xAxis™ sealed flex joints, and industry-leading camber and caster adjustability.
Designed, engineered, tested, and assembled in Colorado, the SPC 25470 Upper Control Arms are built to solve the alignment challenges created by suspension lifts. Using SPC's patented adjustable ball joint system, these control arms allow precise adjustment of both caster and camber, helping restore factory alignment specifications while improving steering feel, straight-line tracking, handling, and tire wear.
Constructed from high-strength forged steel, each arm is equipped with maintenance-free sealed ball joints and innovative xAxis™ sealed flex joints housed in bonded rubber sleeves. This advanced design provides exceptional articulation while preserving factory ride quality and eliminating routine maintenance. Improved spring bucket clearance combined with an impressive 80 degrees of ball joint articulation delivers greater suspension droop travel than many competing ball joint and monoball upper control arms.
With 2 degrees of caster built directly into the arm and up to +4 degrees of total caster adjustment available, the SPC 25470 allows you to properly position oversized tires farther forward in the wheel well, helping minimize or eliminate rubbing after installing larger tires and lift kits.
Forged Steel Construction • Adjustable Camber & Caster • Maintenance-Free Ball Joints • xAxis™ Flex Joints • 80° Articulation
Key Features
- Patented Camber & Caster Adjustment: Corrects alignment geometry after suspension lifts.
- Forged Steel Construction: Heavy-duty design built for demanding off-road and overland use.
- Maintenance-Free Ball Joints: Fully sealed design eliminates routine servicing.
- xAxis™ Sealed Flex Joints: Improve articulation while maintaining factory-like ride quality.
- 80° Ball Joint Articulation: Maximizes suspension travel without binding.
- Improved Spring Bucket Clearance: Allows greater droop travel than many competing control arms.
- +2° Built-In Caster: Helps improve oversized tire clearance and steering stability.
- Sold as a Pair: Complete front upper control arm replacement for one vehicle.
Why It Performs
- Restores Proper Alignment: Corrects caster and camber after lifting your Tacoma.
- Improves Handling: Better steering feel, tracking, and highway stability.
- Maximizes Suspension Travel: High articulation and increased spring bucket clearance improve off-road capability.
- Reduces Tire Rubbing: Allows oversized tires to be positioned farther forward in the wheel well.
- Built for Adventure: Forged steel construction and premium joints withstand harsh off-road environments.
Vehicle Fitment
- Toyota Tacoma (2005–2023)
Technical Specifications
- Brand: SPC (Specialty Products Company)
- Part Number: 25470
- Product: Adjustable Upper Control Arms (Pair)
- Material: Forged Steel
- Ball Joints: Sealed, Maintenance-Free
- Bushings: xAxis™ Sealed Flex Joints
- Maximum Ball Joint Articulation: 80 Degrees
- Built-In Caster: +2 Degrees
- Caster Adjustment Range: 0° to +4°
- Camber Adjustment Range: ±2°
- Position: Front
- Quantity: Pair
- Designed, Engineered, Tested & Assembled In: Colorado, USA
What's Included
- (2) SPC Adjustable Upper Control Arms
- Maintenance-Free Adjustable Ball Joints
- xAxis™ Sealed Flex Joint Bushings
Related Products:
- SPC 25435 Lower Control Arm Cam Bolt Kit (2005–2015 Tacoma)
- SPC 25440 Lower Control Arm Cam Bolt Kit (2016+ Tacoma)
Ideal For
- Lifted Toyota Tacoma Builds
- Overlanding
- Rock Crawling
- Off-Road Suspension Upgrades
- Daily Drivers
- Oversized Tire Installations
- Alignment Correction
- Performance Suspension Systems
Why Choose the SPC 25470 Upper Control Arms?
- Industry-leading adjustable upper control arms trusted by off-road enthusiasts and racers.
- Patented camber and caster adjustment restores factory alignment after lifting.
- Forged steel construction provides exceptional durability for demanding conditions.
- Maintenance-free ball joints and xAxis™ flex joints maximize suspension performance while maintaining ride quality.
- Designed to improve handling, articulation, and tire clearance on lifted Toyota Tacomas.
Why Buy from Expedition Superstore?
- Suspension Experts: Premium suspension components selected for demanding off-road performance.
- Trusted Brands: Genuine SPC products backed by knowledgeable customer support.
- Fast Shipping: Get your suspension trail-ready with premium components delivered quickly.
- Need help building your suspension setup? — Schedule your build chat today!
SPC Adjustable Camber/Caster Upper Control Arms (Pair) - 25470
Restore factory alignment, improve suspension travel, and maximize oversized tire clearance with the SPC 25470 Adjustable Upper Control Arms. Designed specifically for the 2005–2023 Toyota Tacoma, these forged steel control arms feature maintenance-free ball joints, xAxis™ sealed flex joints, and industry-leading camber and caster adjustability.
Designed, engineered, tested, and assembled in Colorado, the SPC 25470 Upper Control Arms are built to solve the alignment challenges created by suspension lifts. Using SPC's patented adjustable ball joint system, these control arms allow precise adjustment of both caster and camber, helping restore factory alignment specifications while improving steering feel, straight-line tracking, handling, and tire wear.
Constructed from high-strength forged steel, each arm is equipped with maintenance-free sealed ball joints and innovative xAxis™ sealed flex joints housed in bonded rubber sleeves. This advanced design provides exceptional articulation while preserving factory ride quality and eliminating routine maintenance. Improved spring bucket clearance combined with an impressive 80 degrees of ball joint articulation delivers greater suspension droop travel than many competing ball joint and monoball upper control arms.
With 2 degrees of caster built directly into the arm and up to +4 degrees of total caster adjustment available, the SPC 25470 allows you to properly position oversized tires farther forward in the wheel well, helping minimize or eliminate rubbing after installing larger tires and lift kits.
Forged Steel Construction • Adjustable Camber & Caster • Maintenance-Free Ball Joints • xAxis™ Flex Joints • 80° Articulation
Key Features
- Patented Camber & Caster Adjustment: Corrects alignment geometry after suspension lifts.
- Forged Steel Construction: Heavy-duty design built for demanding off-road and overland use.
- Maintenance-Free Ball Joints: Fully sealed design eliminates routine servicing.
- xAxis™ Sealed Flex Joints: Improve articulation while maintaining factory-like ride quality.
- 80° Ball Joint Articulation: Maximizes suspension travel without binding.
- Improved Spring Bucket Clearance: Allows greater droop travel than many competing control arms.
- +2° Built-In Caster: Helps improve oversized tire clearance and steering stability.
- Sold as a Pair: Complete front upper control arm replacement for one vehicle.
Why It Performs
- Restores Proper Alignment: Corrects caster and camber after lifting your Tacoma.
- Improves Handling: Better steering feel, tracking, and highway stability.
- Maximizes Suspension Travel: High articulation and increased spring bucket clearance improve off-road capability.
- Reduces Tire Rubbing: Allows oversized tires to be positioned farther forward in the wheel well.
- Built for Adventure: Forged steel construction and premium joints withstand harsh off-road environments.
Vehicle Fitment
- Toyota Tacoma (2005–2023)
Technical Specifications
- Brand: SPC (Specialty Products Company)
- Part Number: 25470
- Product: Adjustable Upper Control Arms (Pair)
- Material: Forged Steel
- Ball Joints: Sealed, Maintenance-Free
- Bushings: xAxis™ Sealed Flex Joints
- Maximum Ball Joint Articulation: 80 Degrees
- Built-In Caster: +2 Degrees
- Caster Adjustment Range: 0° to +4°
- Camber Adjustment Range: ±2°
- Position: Front
- Quantity: Pair
- Designed, Engineered, Tested & Assembled In: Colorado, USA
What's Included
- (2) SPC Adjustable Upper Control Arms
- Maintenance-Free Adjustable Ball Joints
- xAxis™ Sealed Flex Joint Bushings
Related Products:
- SPC 25435 Lower Control Arm Cam Bolt Kit (2005–2015 Tacoma)
- SPC 25440 Lower Control Arm Cam Bolt Kit (2016+ Tacoma)
Ideal For
- Lifted Toyota Tacoma Builds
- Overlanding
- Rock Crawling
- Off-Road Suspension Upgrades
- Daily Drivers
- Oversized Tire Installations
- Alignment Correction
- Performance Suspension Systems
Why Choose the SPC 25470 Upper Control Arms?
- Industry-leading adjustable upper control arms trusted by off-road enthusiasts and racers.
- Patented camber and caster adjustment restores factory alignment after lifting.
- Forged steel construction provides exceptional durability for demanding conditions.
- Maintenance-free ball joints and xAxis™ flex joints maximize suspension performance while maintaining ride quality.
- Designed to improve handling, articulation, and tire clearance on lifted Toyota Tacomas.
Why Buy from Expedition Superstore?
- Suspension Experts: Premium suspension components selected for demanding off-road performance.
- Trusted Brands: Genuine SPC products backed by knowledgeable customer support.
- Fast Shipping: Get your suspension trail-ready with premium components delivered quickly.
- Need help building your suspension setup? — Schedule your build chat today!
