Cam Eliminator Kit
Cam Eliminator Kit
The Cam Eliminator Kit is your Toyota alignment fix!
If you're tired of throwing off your alignment every time you go off-road, the Cam Eliminator Kit is your solution! See the difference for yourself and stop wasting time and money going to the alignment shop after each wheeling trip. Get #Permaligned.
This kit completely replaces the factory eccentric cams with our eccentric plate. The stock round cams are notorious for slipping out of place and potentially damaging your cam tabs. We chose to make our kits a square profile to fit perfectly in between both cam tabs. This ensures maximum hold of your alignment. Others have tried to use different profiles to gain you more adjustment, but are lacking the contact needed on the tabs to really hold your alignment in place. Our 1/4" cam plates make full contact with both tabs making it almost impossible to slip out of place (can be combined with cam tab gussets for maximum strength). Some competitor kits have been seen using thinner 3/16" plates to save on cost, but they have distorted under heavy load. The Cam Eliminator Kit has been used in Ultra4 Racing and was able to withstand the abuse, making us confident in saying that we have the strongest kit in the game!
For more info see our FAQs page.
- All in one, 3 way adjustable (-,0,+) 1/4" steel eccentric plates.
- Grade 8 or 10.9 hardware included. Up to ~30% larger bolts than stock.
- 8 Precision laser cut Cam plates.
- 4 grade 8/10.9 bolts (varies upon kit).
- This product is intended for off-road use only. This can be used with or without aftermarket upper control arms, but is strongly recommended to be used with adjustable upper control arms if you primarily drive the vehicle on-road.
- Can be used with Stock cam tabs, Total Chaos or All-Pro Cam Tab Gussets (will not work with Marlin Crawler).
- 00-06 Tundra/ 01-07 Sequoia kits may need to trim the bolt end if using a long travel CV boot.